صمد قاسمي

Journal Paper

1. "Effects of ball milling sequences on the reactive synthesis of Ti3AlC2 from Ti/Al/C powder mixture"
   Akbar Heidarpour, اميرحسين حقيقي, Samad Ghasemi, Amir Alhaji
   Advanced Ceramics Progress, pp.1-9, 2025
2. "Synthesis of molybdenum carbide using mechanochemical and thermal approaches"
   پگاه مهذب, Samad Ghasemi, Akbar Heidarpour
   synthesis and sintering, pp.211-218, 2024
3. "سنتز پودر مس با مورفولوژي هاي مختلف در فرايند انحلال الكتروشيميايي براده هاي آلياژ برنج و ترسيب پودر مس در كاتد"
   Saeid Karimi, Samad Ghasemi, Vaghar Shima Sadat
   مهندسي متالورژي, pp.1-10, 2023
4. "جايگزيني فرآيند كلرشويي در بازيافت فلز روي از غبار كوره فولادسازي با روشي دوستدار محيط زيست و مبتني بر استخراج حلالي"
   Saeid Karimi, Ashtari Pedram, Mahshad Rafatinia, زهرا محمدعلي زاده, مريم اكبري, Samad Ghasemi
   مهندسي متالورژي و مواد, pp.1-26, 2023
5. "Recycling of brass melting slag through the high-temperature oxidation-leaching process"
   فريبا ملكي, Samad Ghasemi, Akbar Heidarpour
   Sustainable Environment Research, 2022
6. "Anodic dissolution of waste brass chips in sulfuric acid for the recovery of copper and zinc"
   شيماسادات وقار, Samad Ghasemi, Mehdi Pourabdoli Sardroud
   International Journal of Environmental Science and Technology, pp.1-12, 2022
7. "سنتز كربن مشتق شده از كاربيد كلسيم به روش واكنش مكانوشيميايي كاربيد كلسيم با گوگرد، سولفيد آهن و اكسيد روي"
   مهسا رسولي ثمر, Samad Ghasemi, Akbar Heidarpour
   علم و مهندسي سراميك, pp.106-119, 2022
8. "microstructural Variation and Corrosion Behavior of 60/40 Brass/Ti2SC Surface Composite through Friction Stir Processing"
   زهراسادات موسوي, Saeid Karimi, Akbar Heidarpour, سيدمهدي حسيني, Samad Ghasemi
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.3445-3456, 2022
9. "Structural and Morphological Characterization of the Expanded Graphite Obtained by Ball Milling and HF Leaching"
   Saeid Karimi, Akbar Heidarpour, Samad Ghasemi
   Iranian Journal of Materials Science and Engineering, pp.1-12, 2021
10. "Improving mechanical and tribological performances of pure copper matrix surface composites reinforced by Ti2AlC MAX phase and MoS2 nanoparticles"
    Yousef Mazaheri, Mahsa Bahiraei, Mohammad Mahdi Jalilvand, Samad Ghasemi, Akbar Heidarpour
    MATERIALS CHEMISTRY AND PHYSICS, pp.124790-124799, 2021
11. "Electrochemical synthesis of fluorinated graphene nanoplatelets in electrolytes containing hydrofluoric acid and TiO2 nanoparticles"
    Hamed Aghamohammadi, Akbar Heidarpour, Samad Ghasemi
    FlatChem, pp.100172-100182, 2020
12. "Theoretical analysis and experimental Validation of selective oxalate precipitation"
    Samad Ghasemi, نسيم رفيعي, Akbar Heidarpour
    Mineral Processing and Extractive Metallurgy-Transactions of the Institutions of Mining and Metallurgy, pp.1-10, 2020
13. "Structural and morphological characterization of the layered carbide-derived-carbon nanostructures obtained by HF etching of Ti2AlC"
    Akbar Heidarpour, Hamed Aghamohammadi, Samad Ghasemi
    SYNTHETIC METALS, pp.116478-116488, 2020
14. "Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior"
    سيدمهدي حسيني, Akbar Heidarpour, Samad Ghasemi
    Journal of Ultrafine Grained and Nanostructured Materials, pp.110-116, 2020
15. "A novel predictive model for estimation of cell voltage in electrochemical recovery of copper from brass: Application of gene expression programming"
    Samad Ghasemi, شيماسادات وقار, مهران پورظفر, Hesam Dehghani, Akbar Heidarpour
    Journal of Mining and Metallurgy Section B-Metallurgy, pp.237-245, 2020
16. "Effects of ball milling sequences on the in-situ reactive synthesis of the Ti2SC MAX phase"
    سيدمهدي حسيني, Akbar Heidarpour, Samad Ghasemi
    Advances in Applied Ceramics, pp.204-211, 2020
17. "On the surface reinforcing of A356 aluminum alloy by nanolayered Ti3AlC2 MAX phase via friction stir processing"
    علي اصغر منوچهريان, Akbar Heidarpour, Yoosef Mazaheri, Samad Ghasemi
    SURFACE and COATINGS TECHNOLOGY, pp.124884-124884, 2019
18. "Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling"
    علي بشيري صفا, Akbar Heidarpour, Samad Ghasemi
    Journal of Advanced Materials and Processing, pp.39-50, 2019
19. "Kinetics of Ceramic Phase Crystallization in a Glass Derived from Wastes of Iron and Steel Industry"
    Samad Ghasemi, Ali Shafyei
    International Journal of Iron and Steel Society of Iran, 2019
20. "Development of Cu- TiO2 surface nanocomposite: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior"
    Akbar Heidarpour, Yousef Mazaheri, Masoud Roknian, Samad Ghasemi
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.886-897, 2019
21. "On the mechanism of mechanochemical synthesis of Ti2SC from Ti/FeS2/C mixture"
    حسين حسيني, Akbar Heidarpour, Samad Ghasemi
    ADVANCED POWDER TECHNOLOGY, pp.1672-1677, 2019
22. "Study on the chemical stability of the synthesized TiCx in Ti-Al-C system after immersion in the HF+H2O2 solution"
    Hamed Aghamohammadi, Akbar Heidarpour, رسول جمشيدي, Samad Ghasemi
    ADVANCED POWDER TECHNOLOGY, pp.393-398, 2019
23. "The shape evolution of TiCx prepared by mechanical alloying of Ti-Al-C system after HF treatment"
    Akbar Heidarpour, Hamed Aghamohammadi, رسول جمشيدي, Samad Ghasemi
    CERAMICS INTERNATIONAL, pp.4653-4660, 2019
24. "Production and Crystallization Behavior of an Iron Rich Glass-Ceramic Prepared by Ironmaking and Steelmaking Wastes"
    Samad Ghasemi, Ali Shafyei
    International Journal of Iron and Steel Society of Iran, pp.17-25, 2017
25. "An approach to synthesis a new superconductor Belonging to the YBCO Family Y2Ba5Cu7Ox"
    Mojtaba Mazaheri, Samad Ghasemi, Akbar Heidarpour
    Journal of Superconductivity and Novel Magnetism, pp.2637-2640, 2015
26. "Sulfur emission-free process of molybdenum carbide synthesis by lime-enhanced molybdenum disulfide reduction with methane"
    Samad Ghasemi, s a, a s, Jae Yul Kim, Jae Sung Lee
    INDUSTRIAL and ENGINEERING CHEMISTRY RESEARCH, 2011
27. "Thermodynamic investigation of lime-enhanced molybdenite reduction using methane-containing gases"
    Samad Ghasemi, محمد حسن عباسي, علي سيدي
    THERMOCHIMICA ACTA, pp.46-54, 2010

Conference Paper

1. "تأثير سرعت چرخش و ذرات تقويت كننده Ti3AlC2در جوشكاري اصطكاكي اغتشاشي آلياژ آلومينيوم 6061-T6"
   Samad Ghasemi, Akbar Heidarpour, Saeid Amini, Mohammad Amiri, Amirhossein Mirzaei
   The 14th International Conference on Metallurgy and Materials Engineering, 2025
2. "Direct Electro-leaching and Deposition of Copper and Zinc from Brass Alloy Smelting Slag"
   Mahdie Sepehri nia, Saeid Karimi, Samad Ghasemi
   3rd International Conference and 7th National Conference on Materials, Metallurgy & Mining, 2024
3. "سنتز كاربيد موليبدن با به كارگيري واكنش موليبدنيت، كاربيد كلسيم و آهك"
   Fatemeh Zahra Chegeni, Samad Ghasemi, Akbar Heidarpour
   دوازدهمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2023
4. "سنتز كاربيد موليبدن با واكنش مكانوشيميايي موليبدنيت-منيزيم-كربن"
   پگاه مهذب, Samad Ghasemi, Akbar Heidarpour
   دهمين كنفرانس بين المللي مهندسي مواد و متالورژي ايران, 2021
5. "سنتز كربن مشتق شده از كاربيد كلسيم به روش واكنش مكانوشيميايي كاربيد كلسيم و گوگرد و مشخصه يابي آن"
   مهسا رسولي ثمر, Samad Ghasemi, Akbar Heidarpour
   اولين كنفرانس بين المللي و چهارمين كنفرانس ملي مواد، متالورژي و معدن, 2021
6. "بررسي تاثير دما بر فرايند احياي موليبدنيت توسط متان در حضور آهك"
   Samad Ghasemi
   سومين همايش ملي مهندسي مواد, 2019
7. "سنتز و مشخصه يابي (Ti,V)2AlC با ساختار فاز MAX به روش آلياژ سازي مكانيكي"
   Akbar Heidarpour, Samad Ghasemi, آرمان خاني
   3rd National Conference of Materials Engineering, 2019
8. "سنتز و مشخصه يابي كاربيد زيركونيم به روش آلياژسازي مكانيكي با استفاده از ZrO2، C و Al"
   بيتا نظري, Akbar Heidarpour, Samad Ghasemi
   8th International conference om materials and metallurgy iMat 2019, 2019
9. "حذف يون كلر از سرباره ي ذوب كاتد روي"
   عليرضا اكبري, Samad Ghasemi, Ashtari Pedram, Akbar Heidarpour
   هشمين كنفرانس بين المللي مهنسي مواد و متالورژي, 2019
10. "سنتز تركيب Ti2SC فاز MAX به روش آلياژ سازي مكانيكي"
    سيدمهدي حسيني, Akbar Heidarpour, Samad Ghasemi
    12th congress of Iranian ceramic society, 2019
11. "سنتز و مشخصه يابي Ti3AlC2 به روش آلياژ سازي مكانيكي و تف جوشي پلاسمايي جرقه اي (SPS)"
    اميرحسين حقيقي, Akbar Heidarpour, Amir Alhaji, Samad Ghasemi
    7th International conference on Materials Engineering and Metallurgy (iMat2018), 2018
12. "سنتز و مشخصه يابي كاربيد سه تايي در سيستم Ti-S-C با ساختار فاز MAX به روش آلياژ سازي مكانيكي"
    سيدمهدي حسيني, Akbar Heidarpour, Samad Ghasemi
    7th International conference on Materials Engineering and Metallurgy (iMat2018), 2018
13. "رويكردي بر سنتز نانوكاتاليست گوگردزداي ZnO-Al2O3 با استفاده از استات روي"
    Elnaz Famil Sattarian, Behrooz Ghasemi, Samad Ghasemi
    هفتمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2018
14. "ارزيابي پارامترهاي فرايند گوگردزدايي از خمير باتري سربي فرسوده توسط كربنات سديم و هيدروكسيد سديم"
    پريسا آئيني, Samad Ghasemi, Akbar Heidarpour
    ششمين كنفرانس بين المللي مهندسي متالورژي و مواد, 2017
15. "بازيابي روي و مس از سرباره كوره ذوب برنج"
    فريبا ملكي, Samad Ghasemi, Akbar Heidarpour
    ششمين كنفرانس بين المللي مهندسي متالورژي و مواد, 2017
16. "سنتز كاربيد سه تايي در سيستم TiV)-Al-C) با ساختار MAX به روش آسياكاري مكانيكي"
    سيده سميرا نظام آبادي, Akbar Heidarpour, Samad Ghasemi
    6th International Conference on Materials and Metallurgical Engineering, 2017
17. "Effects of Heat Treatment on Ti3SiC2 MAX Phase Synthesized by Mechanical Alloying"
    علي بشيري صفا, Akbar Heidarpour, Samad Ghasemi
    11th Biennial Congress of the Iranian Ceramic Society and 2 th International Conference on Ceramics, 2017
18. "بازيابي نيكل از الكتروليت پالايشگاه مس به روش رسوب اگزالاتي"
    نسيم رفيعي, Samad Ghasemi, Akbar Heidarpour, Masomeh Torabi Parizi
    5th International Conference on Materials Engineering and Metallurgy, 2016
19. "بررسي ترموديناميكي انحلال تركيبات لانتانيم و سريم از كاتاليست مستعمل"
    نگار برقي لشگري, Akbar Heidarpour, Samad Ghasemi
    5th International Conference on Materials Engineering and Metallurgy, 2016
20. "بررسي رسوب شيميايي مس از محلول ليچينگ توسط پيريت و كالكوپيريت"
    Hanie Tehrandoost, Akbar Heidarpour, Samad Ghasemi, Masomeh Torabi Parizi
    5th International Conference on Materials Engineering and Metallurgy, 2016
21. "Comparison Study Between Microstructure and Tensile Properties of Brass Bar Produced by Continuous Casting and Hot Extrusion"
    سميرا زنگنه نجفي, Samad Ghasemi, Ehsan Khademi, fateh rohollah
    پنجمين كنفرانس بين المللي انجمن مهندسي مواد و متالورژي و انجمن علمي ريخته گري ايران, 2016
22. "ارزيابي ميزان رضايت مندي تحصيلي دانشجويان مهندسي مواد و ت ثير آن در كيفيت آموزش"
    زهرا نادري, Samad Ghasemi, اميد حميدي
    سومين كنفرانس ملي و دهمين همايش ارزيابي كيفيت نظام هاي دانشگاهي, 2016
23. "Effect of Impurity Ions on Copper Leaching from Oxide-Chalcocite ores"
    حجت ابوطالبي عبداله آبادي, Samad Ghasemi, Akbar Heidarpour, مهدي ملايي نسب
    iMat conference 2015, 2015
24. "Recovery of Lanthanum and Cerium compounds from spent catalyst by hydrometallurgical route"
    Akbar Heidarpour, Samad Ghasemi, نگار برقي لشگري
    iMat conference 2015, 2015
25. "Arsenic Removal and stabilization of Smelting Dust of Khatoon Abad copper complex by hydrometallurgical route"
    ميثم آخوندي علي آباد, Akbar Heidarpour, Samad Ghasemi
    Third International Engineering Materials and Metallurgy Conference and Exhibition (iMat2014), 2014