امير مومني

Journal Paper

1. "The Hot Deformation Behavior of Ti-48Al-2Cr-2Nb Intermetallic with Lamellar Initial Microstructure"
   Hossein Rezaei, Maryam Morakabati, Amir Momeni
   PHYSICS OF METALS AND METALLOGRAPHY, pp.730-737, 2025
2. "The influence of aluminum and titanium content on the microstructural evolution and properties of a cobalt-based superalloy"
   Mohammadreza Mokhtare, Amir Momeni
   MATERIALS CHEMISTRY AND PHYSICS, pp.131109-131115, 2025
3. "بررسي رفتار تغييرشكل داغ تركيب بين فلزي Ti-48Al-2Cr-2Nbبا ساختار اوليه دوگانه"
   Hossein Rezaei, Maryam Morakabati, Amir Momeni
   مهندسي ساخت و توليد, pp.65-77, 2025
4. "Effects of Re addition and initial microstructure on high-temperature oxidation of AlMo0.5NbTa0.5TiZr refractory high entropy alloy"
   Mohammadreza Mokhtare, Milad Zohrevand, Amir Momeni, Saeed Sadeghpour, Auezhan Amanov
   INTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS, pp.107319-107325, 2025
5. "The Effect of Initial Microstructure on the Hot Deformation Behavior of Ti-48Al-2Cr-2Nb Intermetallic"
   Hossein Rezaei, Maryam Morakabati, Amir Momeni
   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, pp.1-6, 2025
6. "Effect of Re addition on microstructure, properties, and performance of AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy"
   Milad Zohrevand, Mohammadreza Mokhtare, Amir Momeni, Saeed Sadeghpour, Mahesh Somani
   INTERMETALLICS, 2024
7. "The effect of SMAW welding parameters on stress corrosion cracking of the X65 gas pipelines steel"
   Hanie Nooriun, Ghaderi Hamidi -Ahmad, Amir Momeni
   WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, pp.1-10, 2024
8. "Development of a Novel Heat Treatment Method to Achieve a Finegrained Near Lamellar Microstructure in Ti-48Al-2Cr-2Nb Intermetallic"
   Hossein Rezaei, Maryam Morakabati, Amir Momeni
   مكانيك هوافضا, pp.47-57, 2024
9. "بررسي و اصلاح اثر اصطكاك و گرماي آدياباتيك حين تغييرشكل داغ فشاري يك تركيب بين فلزي آلومينايد تيتانيم ريختگي"
   Hossein Rezaei, Maryam Morakabati, Amir Momeni
   پژوهشنامه ريخته گري, pp.81-88, 2024
10. "Hot deformation behavior and microstructural characterization of a novel high entropy steel"
    Hanye Moradjoye hamedani, Behzad Tolaminejad, Amir Momeni, Saeed Sadeghpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024
11. "Microstructure characterization and dynamic recrystallization behavior of Ni-Cu alloy during hot deformation"
    Amir Momeni, Golamreza Ebrahimi, Mohammad Jahazi, Hamidreza Ezatpour
    MECHANICS OF MATERIALS, 2024
12. "Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy"
    Ehsan Asghari, Razieh Hayati, Amir Momeni, Nader Setoudeh, Abbas Mohassel
    Iranian Journal of Materials Forming, pp.44-54, 2023
13. "Phase stability enhancement in AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy through Re addition"
    Mohammad Reza Mokhtare, ميلاد زهره وند, Amir Momeni, Saeed Sadeghpour, Mahesh Somani
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023
14. "بررسي رفتار تغييرشكل گرم و تحولات ريزساختاري در آلياژ نزديك آلفا Ti-8Al-1Mo-1V"
    Zarghani Fatemeh, Golam Reza Ebrahimi, Amir Momeni, Hamid Reza Ezatpour
    مهندسي متالورژي و مواد, pp.35-50, 2023
15. "Effect of heat treatment regime on microstructure and phase evolution of AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy"
    Zahra Zarei, Milad Zohrevand, Amir Momeni, Sadeghpour Saeed, Mahesh Somani
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023
16. "Microstructure and hot shear deformation behavior of a fine-grained AA5083 aluminum alloy"
    Naeimeh Fakhar, Ehsan Khademi, Mahdi Sabbaghian, Amir Momeni, Faramarz Fereshteh-Saniee, Peter Nagy, Abel Szabo, Jeno Gubicza
    MATERIALS CHEMISTRY AND PHYSICS, 2023
17. "Influence of Graphene Oxide Nanoplates on Strengthening Mechanism of Al6061 GO Nanocomposites"
    Mehdi Hedayatiab, Amir Momeni
    METALS AND MATERIALS INTERNATIONAL, pp.247-257, 2022
18. "EBSD study on the effect of second phases and restoration mechanisms in hot deformed new Mn-Ni-Cr alloy"
    Zahra SangariMotlagh, Amir Momeni, Behzad Tolaminejad, Vahid Javaheri, Mehdi Soltanalinezhad
    MATERIALS CHEMISTRY AND PHYSICS, pp.1-15, 2022
19. "ارزيابي تاثير عمليات حرارتي بر تحولات ساختاري و خواص مكانيكي تركيب بين فلزي Ti-48Al-2Cr-2Nb"
    Hossein Rezaei, Maryam Morakabati, Amir Momeni
    پژوهشنامه ريخته گري, pp.125-132, 2022
20. "Deformation Behavior and Dynamic Recrystallization Mechanism (s) of AMS 5643 Stainless Stee"
    زهرا سنگري مطلق, Behzad Tolaminejad, Amir Momeni, Hamidreza Jafarian
    Metallography Microstructure and Analysis, pp.790-800, 2022
21. "Deformation Behavior and Dynamic Recrystallization Mechanism(s) of AMS 5643 Stainless Steel"
    Zahra Sangarimotlagh, Behzad Tolaminejad, Amir Momeni, HamidReza Jafarian
    Metallography Microstructure and Analysis, pp.1-11, 2022
22. "Precipitation and Flow Behavior of AISI 630 Stainless Steel Deformed at Elevated Temperatures"
    Zahra Sangarimotlagh, Behzad Tolaminejad, Amir Momeni, Irina Fedorova, Ivan S. Zuiko, Rustam Kaibyshev
    Journal of Materials Engineering and Performance, pp.1-13, 2022
23. "On the microstructure and mechanical properties of FeCoCrCuNi high entropy alloy during hot compression"
    Mostafa Hedayati Marzbali, Hamidreza Jafarian, sepideh Bokaei, Nokeun Park, Amir Momeni, Ali Reza Eivani
    Journal of Materials Research and Technology-JMR and T, pp.1747-1760, 2022
24. "Dynamic recrystallisation and constitutive equation in hot deformed AISI H10 tool steel"
    Maryam Kamali Ardakani, Maryam Morakabati, Amir Momeni
    IRONMAKING and STEELMAKING, pp.322-334, 2022
25. "The influence of new severe plastic deformation on microstructure, mechanical and corrosion properties of Mg-0.8 Mn-0.5 Ca alloy"
    M Khani, Golam Reza Ebrahimi, Hamid Reza Ezatpour, Amir Momeni
    Journal of Mining and Metallurgy Section B-Metallurgy, pp.1-29, 2021
26. "Design of a novel HSLA steel with a combination of high strength (140-160 ksi) and excellent toughness"
    Mehdi Soltanalinejad, Sadegh Ghazvinian, Mahmoud Amirsalehi, Amir Momeni
    International Journal of Materials Research, pp.800-811, 2021
27. "Static Analysis and Fatigue of DHS Implants to Treatment Femoral and Intertrochanteric Neck Fractures Using Ti6Al4V and SS316 Alloys, A finite Element Analysis"
    Shokrgozar Navi Arash, Shahram Etemadi Haghighi, M Haghpanahi, Amir Momeni
    Journal of Solid Mechanics, pp.1-23, 2021
28. "Investigation of Microstructure and Corrosion of TiNbTaZrMo High-Entropy Alloy in the Simulated Body Fluid"
    Arash shokrgozar, Shahram Etemadi Haghighi, Mohammad Haghpanahi, Amir Momeni
    Journal of Bionic Engineering, pp.118-127, 2021
29. "Effect of rotation and traverse speeds on the microstructure and mechanical properties of friction stir processed 2205 duplex stainless steel"
    Samira Ghadar, Amir Momeni, Ehsan Khademi, Shahab Kazemi
    Materials Science and Engineering B-Advanced Functional Solid-State Materials, pp.114813-114813, 2021
30. "Flexible piezoelectric PVDF/NDs nanocomposite films: Improved electroactive properties at low concentration of nanofiller and numerical simulation using finite element method"
    s sodagar, Babak Jaleh, P Fakhri, M Kashfi, BF Mohazzab, Amir Momeni
    JOURNAL OF POLYMER RESEARCH, pp.1-10, 2020
31. "Prediction of Hot Deformation Flow Curves of 1.4542 Stainless Steel"
    زهرا سنگري مطلق, Behzad Tolaminejad, Amir Momeni
    METALS AND MATERIALS INTERNATIONAL, pp.33-44, 2020
32. "Effect of Boron on the Microstructure Evolution and Dynamic Recrystallization Kinetics of ALLVAC718Plus Superalloy"
    Hamidreza Ezatpour, Hamideh Ershadikia, Golamreza Ebrahimi, Amir Momeni
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.212-227, 2020
33. "Laser surface treatment of pure titanium: Microstructural analysis, wear properties, and corrosion behavior of titanium carbide coatings in Hank's physiological solution"
    Behnaz Feizi Mohazzab, Babak Jaleh, Arash Fattah-alhosseini, فاطمه محمودي, Amir Momeni
    Surfaces and Interfaces, pp.100597-100597, 2020
34. "Investigation of the effect of hot compression on microstructure and mechanical properties of Mn-25Ni-5Cr alloy"
    Zahra Sangari Motlagh, Zahra Dinmohammadi, Mahnaz Asadbeigi, Amir Momeni, Omid Bayat
    مهندسي مكانيك مدرس, pp.2689-2696, 2020
35. "Investigation on Microstructure Evolution of a Semi-Austenitic Stainless Steel Through Hot Deformation"
    Saeed Mortezaei, H Arabi, Sh Seyedein, Amir Momeni, Mehdi Soltanalinejad
    Iranian Journal of Materials Science and Engineering, pp.60-69, 2020
36. "Effect of graphene oxide nanoplates on the microstructure, quasi-static and dynamic penetration behavior of Al6061 nanocomposites"
    Mehdi Hedayatian, Amir Momeni, Alireza Nezamabadi, Khodadad Vahedi
    COMPOSITES PART B-ENGINEERING, pp.107652-107652, 2020
37. "Surface composite on Cu substrate with SiO2 reinforcement fabricated by sever plastic deformation: microstructure, mechanical and tribological"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.1-10, 2019
38. "nvestigation and modelling the flow behavior of Fe-17Cr-7Ni semi-Austenitic precipitation hardening stainless steel using the hyperbolic sine constitutive equation"
    Saeed Mortezaee, H Arabi, S. H. Seyedein, Amir Momeni, Mehdi Soltanalinejad
    Modares Mechanical Engineering, pp.1439-1445, 2019
39. "High temperature behavior of severely deformed AA 5083 through equal channel lateral extrusion"
    Naeimeh Fakhar, Ehsan Khademi, Amir Momeni
    MATERIALS CHEMISTRY AND PHYSICS, 2019
40. "Microstructural and Mechanical Behavior of Al6061-Graphene Oxide Nanocomposites"
    Mahdi Hedayatian, Khodadad Vahedi, Alireza Nezamabadi, Amir Momeni
    METALS AND MATERIALS INTERNATIONAL, pp.1-13, 2019
41. "Surface composite on Cu substrate with SiO2 reinforcement fabricated by sever plastic deformation: Microstructure, mechanical and tribological properties"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.86-95, 2019
42. "تأثير تقويت كننده اكسيد گرافن بر خواص بالستيك نانوكامپوزيت Al6061-GO"
    Mahdi Hedayatian, Khodadad Vahedi, Alireza Nezamabadi, Amir Momeni
    علوم و فناوري كامپوزيت, pp.401-410, 2019
43. "A comparative study on the hot deformation behavior of 410 stainless and K100 tool steels"
    سميرا قدر, Amir Momeni, Behzad Tolaminejad, M Soltanalinezhad
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.394-406, 2019
44. "Dynamic recrystallization in Monel400 Ni-Cu alloy: Mechanism and role of twinning"
    Golam Reza Ebrahimi, Amir Momeni, Hamidreza Ezatpour, Mohammad Jahazi, Philippe Bocher
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.376-385, 2019
45. "A comparative study on the hot deformation behavior of Ti5Al5Mo5V3Cr and newly developed Ti4Al7Mo3V3Cr alloys"
    Amir Momeni, Seyed Mehdi Abbasi, Saeed Sadeghpour
    VACUUM, pp.410-418, 2019
46. "Microstructure, tribological and mechanical properties of Al7075/Ti3AlC2 MAX-phase surface composite produced by friction stir processing"
    Saeed Ahmadifard, Amir Momeni, سيمين بهمن زاده, Shahab Kazemi
    VACUUM, pp.134-141, 2018
47. "Effects of Nb on hot tensile deformation behavior of cast Haynes 25 Co-Cr-W-Ni alloy"
    Mehdi Sami Zafarghandi, Seyed Mehdi Abbasi, Amir Momeni
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.18-29, 2018
48. "Modelling the yield point phenomena during deformation at elevated temperatures: case study on Inconel 600"
    Amir Momeni, Golam Reza Ebrahimi, Hamid Reza Ezatpour
    PHILOSOPHICAL MAGAZINE, pp.2543-2561, 2018
49. "بررسي رفتار سيلان و تحولات ريزساختاري سوپرآلياژ پايه نيكل ريختگي GTD 111 طي آزمون فشار گرم"
    مهسا محمدپور, Amir Momeni
    مواد نوين, pp.167-178, 2018
50. "Strain-induced transformation of supersaturated ferrite into nano-sized austenite in a thermomechanically processed duplex stainless steel"
    مهسا محمدپور, Amir Momeni, Hamid Reza Jafarian, Hossein Alinejad
    MATERIALS LETTERS, pp.5-9, 2018
51. "Flow curves and microstructure of K107 tool steel subjected to compression tests at elevated temperatures"
    سميرا زنگنه نجفي, Amir Momeni, Hamid Reza Jafarian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.78-90, 2018
52. "Effect of Micro?Alloy Elements on Dynamic Recrystallization Behavior of a High?Manganese Steel"
    H.R. Ezatpour, Marzieh Torabi Parizi, Golam Reza Ebrahimi, Amir Momeni
    STEEL RESEARCH INTERNATIONAL, pp.1-10, 2018
53. "Microstructural Investigations and Fracture Analysis of a Multi-Layer Al Panel of a Crashed Aircraft"
    Amir Momeni, hamidraza faridi, مهسا محمدپور, Vahab Sarfarazi
    Journal of Environmental Friendly Materials, pp.41-47, 2018
54. "Microstructural evolution of a superaustenitic stainless steel during a two-step deformation process"
    Bayat N, Golam Reza Ebrahimi, Amir Momeni, Ezatpour H.R.
    International Journal of Minerals Metallurgy and Materials, pp.181-189, 2018
55. "Modeling the viscoplastic behavior and grain size in a hot worked Nbbearing high0Mn steel"
    Golamreza Ebrahimi, Amir Momeni, H.A. Ezatpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.25-35, 2018
56. "Modeling the viscoplastic behavior and grain size in a hot worked Nb-bearing high-Mn steel"
    Golam Reza Ebrahimi, Amir Momeni, Hamid Reza Ezatpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.25-35, 2018
57. "Flow curves dynamic recrystallization and precipitation in a medium carbon low alloy steel"
    Golam Reza Ebrahimi, Amir Momeni, Shahab Kazemi, Hossein Alinejad
    VACUUM, pp.135-145, 2017
58. "MECHANICAL AND MICROSTRUCTURAL RESPONSE OF NEAR BETA Ti ALLOYS TO HOT TENSILE TESTING"
    Abbasi Seyed Mehdi, Amir Momeni, Mohammad Daraee, Adli Akhondzadeh, Ghazi Mirsaeed Saeed
    ARCHIVES OF METALLURGY AND MATERIALS, pp.815-823, 2017
59. "Recrystallization precipitation and flow behavior of D3 tool steel under hot working condition"
    سميرا زنگنه نجفي, Amir Momeni, Hamidreza Jafarian, سميرا قدر
    MATERIALS CHARACTERIZATION, pp.437-447, 2017
60. "Physical and Numerical Investigations of Gas Turbine Blades Failure"
    Hamidreza Faridi, Amir Momeni, مهسا محمدپور, Vahab Sarfarazi
    journal of environmental friendly materials, pp.55-64, 2017
61. "توليد كامپوزيت سطحي آلومينيم 2024 تقويت شده با نانو ذرات كاربيد بور توسط فرآوري اصطكاكي اغتشاشي"
    saeed Ahmadifard, Amir Momeni
    مهندسي مكانيك مدرس, pp.343-350, 2017
62. "A Comparative Study on the Hot Working Behavior of Inconel 718 and ALLVAC 718 Plus"
    Amir Momeni, Seyed mehdi Abbasi, Maryam Morakabati, Hassan Badri
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.1216-1229, 2017
63. "Effect of quenching and tempering on microstructure and mechanical properties of 410 and 410 Ni martensitic stainless steels"
    Masoud Mirzaee, Amir Momeni, Niloofar Aeini, Hamid Keshmiri
    JOURNAL OF MATERIALS RESEARCH, pp.1-10, 2017
64. "Flow softening behavior of Ti-13V-11Cr-3Al beta Ti alloy in double-hit hot compression tests"
    Amir Momeni, Seyed mehdi Abbasi, Maryam Morakabati, SM GaziMirsaeed
    JOURNAL OF MATERIALS RESEARCH, pp.3900-3906, 2016
65. "Mechanical properties of polycarbonate-TiO2 nanocomposite film"
    نيما شهبازي, بابك ژاله, Amir Momeni
    INDIAN JOURNAL OF PURE and APPLIED PHYSICS, pp.241-250, 2016
66. "The physical interpretation of the activation energy for hot deformation of Ni and Ni-30Cu alloys"
    Amir Momeni
    JOURNAL OF MATERIALS RESEARCH, pp.1077-1084, 2016
67. "Nanodiamond particles/PVDF nanocomposite flexible films thermal mechanical and physical properties"
    Babak Jaleh, Shima sodagar, Amir Momeni, Ameneh Jabari
    Materials Research Express, pp.1-13, 2016
68. "Hot workability of cast and wrought Ni-42Cu alloy through hot tensile and compression tests"
    Mohammad Arjmand, Seyed Mehdi Abbasi, Ali Karimi Taheri, Amir Momeni
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, pp.1589-1597, 2016
69. "Microstructure and flow behavior of cast 2304 duplex stainless steel at elevated temperatures"
    Hossein Alinejad, Bahman Korojy, Ebrahimi Golam Reza, Amir Momeni
    JOURNAL OF MATERIALS RESEARCH, pp.3939-3947, 2016
70. "Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation"
    Abbasi Seyed Mehdi, Amir Momeni, YC Lin, Hamidreza Jafarian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.154-160, 2016
71. "Microstructure and mechanical behavior of hot compressed Ti 6V 6Mo 6Fe 3Al"
    سيدمهدي عباسي, Amir Momeni, آخوندزاده آدلي, سيدمهدي قاضي ميرسعيد
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.21-28, 2015
72. "Yield point phenomena in TIMETAL 125 beta Ti alloy"
    Amir Momeni, seyed mehdi abbasi, Maryam Morakabati, Adli Akhondzadeh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.142-148, 2015
73. "Application of a self-consistent model to study the flow behavior of CuZn39Pb3 at elevated temperatures"
    Amir Momeni
    JOURNAL OF MATERIALS RESEARCH, pp.3453-3460, 2015
74. "Interaction between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel"
    غلامرضا ابراهيمي, Amir Momeni, حميد اسكتدري
    Iranian Journal of Materials Forming, pp.43-50, 2015
75. "Effect of microalloying additions on the hot ductility of cast FeNi36"
    Seyed Mehdi Abbasi, Maryam Morakabati, Rashid Mahdavi, Amir Momeni
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.602-610, 2015
76. "On the opposition of dynamic recrystallization and solute dragging in steels"
    Amir Momeni, Seyed Mehdi Abbasi
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.318-326, 2015
77. "Effect of chemical composition and processing variables on the hot flow behavior of leaded brass alloys"
    Amir Momeni, Golam Reza Ebrahimi, Hamidreza Faridi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.1-8, 2015
78. "Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test"
    E Kevanloo, Golam Reza Ebrahimi, SAA Sani, Amir Momeni
    Iranian Journal of Materials Forming, pp.32-43, 2014
79. "Dynamic recrystallization behavior and constitutive analysis of Incoloy 901 under hot working condition"
    Amir Momeni, Seyed Mehdi Abbasi, Maryam Morakabati, Hasan Badri, X Wang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.51-60, 2014
80. "Hot Deformation Behavior of Beta Titanium Ti-13V-11Cr-3Al Alloy"
    Seyed Mehdi Abbasi, Amir Momeni, Maryam Morakabati, Amir Hossein Sheikhanli
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.5201-5211, 2014
81. "Effect of Titanium and Niobium on Modifying the Microstructure of Cast K100 Tool Steel"
    Masoud Mirzaee, Amir Momeni, Hamid Keshmiri, Reza Razavinejad
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, pp.2304-2314, 2014
82. "Dynamic Recrystallization and Precipitation in 13Cr Super-Martensitic Stainless Steels"
    golam reza ebrahimi, Amir Momeni, mohammad jahazi, Philippe Bucher
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.2219-2231, 2014
83. "Influence of hot working on mechanical and physical properties of an Fe Ni Co alloy"
    seyed mehdi abbasi, Amir Momeni, Maryam morakabati, Rashid Mahdavi
    International Journal of Materials Research, pp.755-763, 2014
84. "Hot Deformation Behavior of Incoloy 901 Through Hot Tensile Testing"
    Fatemeh Mohammadi Shore, maryam morakabati, seyed mehdi abbasi, Amir Momeni
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.1424-1433, 2014
85. "Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression"
    Amir Momeni, Shahab Kazemi, Golam Reza Ebrahimi, Alireza Maldar
    International Journal of Minerals Metallurgy and Materials, pp.36-45, 2014
86. "Hot Ductility of Incoloy 901 Produced by Vacuum Arc Remelting"
    fatemeh mohammadi shore, M Morakabati, seyed mehdi abbasi, Amir Momeni, rashid mahdavi
    ISIJ INTERNATIONAL, pp.1353-1360, 2014
87. "Microstructure evolution at the onset of discontinuous dynamic recrystallization A physics-based model of subgrain critical size"
    Amir Momeni, Golam Reza Ebrahimi, Mohammad jahazi, Philippe Bocher
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.199-210, 2014
88. "Developing the Processing Maps Using the Hyperbolic Sine Constitutive Equation"
    Amir Momeni, Kamran Dehghani, Golam Reza Ebrahimi, Shahab Kazemi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.5567-5576, 2013
89. "Law of mixture used to model the flow behavior of a duplex stainless steel at high temperatures"
    Amir Momeni, Kamran Dehghani, Cecilia Poletti
    MATERIALS CHEMISTRY AND PHYSICS, pp.747-755, 2013
90. "خواص مكانيكي و ريزساختار اتصال بين مونل 400 و فولاد ساده كربني"
    Amir Momeni, Reza Sarmast, Vahid Abooi
    فصلنامه علمي، پژوهشي و صنعتي مهندسي جوش ايران, pp.13-16, 2013
91. "Hot deformation behavior of microstructural constituents in a duplex stainless steel during high-temperature straining"
    Amir Momeni, Shahab Kazemi, علي بحراني
    International Journal of Minerals Metallurgy and Materials, pp.953-960, 2013
92. "Hot deformation behavior of a Fe-29Ni-17Co alloy"
    Mohammad Yazdani, Seyed Mehdi Abbasi, Ali Karimi Taheri, Amir Momeni
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, pp.3271-3279, 2013
93. "Constitutive Analysis and Processing Map for Hot Working of a Ni-Cu Alloy"
    Golamreza Ebrahimi, Amir Momeni, Seyed Mehdi Abbasi, Hossein Monajatizadeh
    METALS AND MATERIALS INTERNATIONAL, pp.11-17, 2013
94. "On the constitutive modeling and microstructural evolution of hot compressed A286 iron-base superalloy"
    H Dehghan, Seyed Mehdi Abbasi, Amir Momeni, Ali Karimi Taheri
    JOURNAL OF ALLOYS AND COMPOUNDS, pp.13-19, 2013
95. "Dynamic Recrystallization Behavior of 13 Cr Martensitic Stainless Steel under Hot Working Condition"
    Golam Reza Ebrahimi, Hamid Keshmiri, Ali Reza Maldar, Amir Momeni
    JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, pp.467-473, 2012
96. "Hot deformation behavior and constitutive modeling of VCN200 low alloy steel"
    Amir Momeni, Seyed Mehdi Abbasi, Hasan Badri
    APPLIED MATHEMATICAL MODELLING, pp.5624-5632, 2012
97. "Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-5"
    Mirzaee Masoud, Hamid Keshmiri, Ebrahimi Golam Reza, Amir Momeni
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.25-31, 2012
98. "Hot working behavior of Fe-29Ni-17Co analyzed by mechanical testing and processing map"
    Abbasi Seyed Mehdi, Amir Momeni
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.330-335, 2012
99. "Modeling the Flow Curve of AISI 410 Martensitic Stainless Steel"
    Amir Momeni, K Dehghani, M Heidari , مجيد واثقي
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.10-20, 2012
100. "Mechanical and microstructural analysis of 2205 duplex stainless steel under hot working condition"
     Amir Momeni, Kamran Dehghani, Xiaoxo Zhang
     JOURNAL OF MATERIALS SCIENCE, pp.2966-2974, 2012
101. "Effect of heat treatment variables on microstructure and mechanical properties of 15Cr 4Ni 0.08C martensitic stainless steel"
     Golamreza Ebrahimi, Hamid Keshmiri, Amir Momeni
     IRONMAKING and STEELMAKING, pp.123-128, 2011
102. "Hot ductility of a Fe Ni Co alloy in cast and wrought conditions"
     Mohammad Yazdani, Seyed Mehdi Abbasi, Amir Momeni, Ali Karimi Taheri
     MATERIALS and DESIGN, pp.2956-2962, 2011
103. "Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16 Cr and 25 Ni"
     Golamreza Ebrahimi, Hamid Reza Keshmiri, Amir Momeni, M Mazinani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.7488-7493, 2011
104. "Microstructural Evolution and Flow Analysis during Hot Working of a Fe-Ni-Cr Superaustenitic Stainless Steel"
     Amir Momeni, Kamran Dehghani
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, pp.1925-1932, 2011
105. "Repetitive Thermomechanical Processing towards Ultra Fine Grain Structure in 301 304 and 304L Stainless Steels"
     Amir Momeni, Seyed Mehdi Abbasi
     JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, pp.338-343, 2011
106. "Effect of hot working and post-deformation heat treatment on microstructure and tensile properties of Ti-6Al-4V alloy"
     Seyed Mehdi Abbasi, Amir Momeni
     TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, pp.1728-1734, 2011
107. "Microstructural evolution through hot working of the single phase and two phase Ti-6Al-4V alloy"
     Leila Sahebdel, Seyed Mehdi Abbasi, Amir Momeni
     International Journal of Materials Research, pp.41-47, 2011
108. "Hot working behavior of 2205 austenite ferrite duplex stainless steel characterized by constitutive equations and processing maps"
     Amir Momeni, Kamran Dehghani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.1448-1454, 2011
109. "Hot deformation behavior of austenite in HSLA-100 microalloyed steel"
     Amir Momeni, H Arabi, Alireza Rezaei, Hasan Badri, Seyed Mehdi Abbasi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.2158-2163, 2011
110. "Effect of hot working on flow behavior of Ti 6Al 4V alloy in single phase and two phase regions"
     Amir Momeni, Seyed Mehdi Abbasi
     MATERIALS and DESIGN, pp.3599-3604, 2010
111. "Effect of Hot Working on Secondary Phase Formation in 2205 Duplex Stainless Steel"
     Amir Momeni, Kamran Dehghani
     JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, pp.851-857, 2010
112. "Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel"
     Amir Momeni, Kamran Dehghani, Hamid Keshmiri, Golamreza Ebrahimi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, pp.1605-1611, 2010
113. "Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases"
     Hamid Farnoush, Amir Momeni, Kamran Dehghani, jamshid Aghazadeh Mohandesi, Hamid Keshmiri
     MATERIALS and DESIGN, pp.220-226, 2010
114. "Effect of Aging Time and Temperature on Mechanical Properties and Microstructural Evolution of 2205 Ferritic-Austenitic Stainless Steel"
     Hamid Keshmiri, Amir Momeni, Kamran Dehghani, Golam Reza Ebrahimi, Heidari Golam Reza
     JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, pp.597-602, 2009
115. "METADYNAMIC RECRYSTALLIZATION OF A PRECIPITATION HARDENABLE STAINLESS STEEL"
     Amir Momeni, Ali Shokuhfar, Seyed Mehdi Abbasi
     METALURGIJA, pp.179-186, 2007
116. "Hot Compression Behavior of As-Cast Precipitation-Hardening Stainless Steel"
     Amir Momeni, Seyed Mehdi Abbasi, Ali Shokuhfar
     JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, pp.66-70, 2007
117. "DYNAMIC AND METADYNAMIC RECRYSTALLIZATION OF A MARTENSITIC PRECIPITATION HARDENABLE STAINLESS STEEL"
     Amir Momeni, Seyed Medhi Abbasi, Ali Shokuhfar
     CANADIAN METALLURGICAL QUARTERLY, pp.189-194, 2007
118. "Dynamic Recrystallization of a Cr-Ni-Mo-Cu-Ti-V Precipitation Hardenable Stainless Steel"
     Amir Momeni, Seyed Mehdi Abbasi, Ali Shokuhfar
     JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, pp.775-778, 2007

Conference Paper

1. "مقايسه تنش سيلان بدست آمده از منحني هاي تنش -كرنش مربوط به كار گرم سوپرآلياژ پايه نيكل اينكونل 617 با نتايج استخراج شده از معادله بنيادين"
   Ehsan Asghari, Razieh Hayati, Amir Momeni, Nader Setoudeh, Abbas Mohassel
   سومين كنفرانس بين المللي و هفتمين كنفرانس ملي مهندسي مواد، متالورژي و معدن, 2024
2. "بررسي مقدار خطاي عددي ناشي از تاثير پارامترهاي متالورژيكي حين تغييرشكل داغ يك تركيب فلزي آلومينايد تيتانيوم"
   Hossein Rezaee, Maryam Morakabati, Amir Momeni
   دومين كنفرانس ملي مديريت و مهندسي كيفيت و قابليت اتكا, 2023
3. "تاثير عمليات حرارتي بر ريزساختار و خواص مكانيكي آلياژ ديرگداز آنتروپي بالاي AlMo0.5NbTa0.5TiZr"
   Zahra Zarei, Amir Momeni
   يازدهمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2022
4. "بررسي رفتار تغيير شكل گرم يك فولاد آنتروپي بالاي جديد"
   Hanye Moradjoye hamedani, Behzad Tolaminejad, Amir Momeni
   يازدهمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2022
5. "بررسي تاثير كرنش ثانويه فشاري بر سختي آلياژ AL5083 فراوري شده توسط عمليات كوبش متوالي"
   Amir Momeni, Naeimeh Fakhar, Fatemeh Zahra Chegeni
   يازدهمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2022
6. "On a novel refractory high entropy alloy phase evolution: FESEM characterization"
   Mohammad Reza Mokhtare, Milad Zohrevand, Amir Momeni
   يازدهمين كنفرانس بين المللي مهندسي مواد و متالورژي ايران, 2022
7. "مشخصه يابي و بررسي نفوذ دمابالاي عناصر در يك آلياژ آنتروپي بالاي نسوز"
   Mohammad Reza Mokhtare, Milad Zohrevand, Amir Momeni
   هشتمين كنفرانس مهندسي مكانيك، مواد و متالورژي, 2022
8. "تاثير زمان عمليات آنيل در منطقه دوفازي آلفا/بتا بر ريزساختار و سختي آلياژ تي-6 آل4 ان"
   Pegah Rashidi, Mahgol Sadooghi, Amir Momeni
   10th International Conference on Materials and Metallurgical Engineering, 2021
9. "بررسي رفتار خزش و تغييرشكل كامپوزيت آلومينيوم 6061 تقويت شده با نانو صفحات اكسيد گرافن در دماي بالا"
   فاطمه محمودي, Amir Momeni, Mahdi Hedayatian, Behzad Tolaminejad
   دهمين كنفرانس بين المللي مهندسي متالورژي و مواد, 2021
10. "اثر عمليات حرارتي و پيرسازي بر تحولات ريزساختاري در سوپرآلياژ پايه كبالت Mar-M 302"
    Mohammad Reza Mokhtare, Amir Momeni
    10th International Conference on Materials and Metallurgical Engineering, 2021
11. "بررسي تاثير دما روي عملكرد مايع نافذ در تست PT بر روي تست بلوك"
    روح اله محمدي, Behzad Tolaminejad, Amir Momeni
    هفتمين كنفراس بين المللي يافه هاي نوي علم و تكنولوژي, 2020
12. "بررسي تاثير دما بر خواص مكانيكي اتصال فولاد زنگ نزن 321 در جوشكاري GTAW"
    روح اله محمدي, Behzad Tolaminejad, Amir Momeni
    هفتمين كنفراس بين المللي يافه هاي نوي علم و تكنولوژي, 2020
13. "بررسي پارامترهاي موثر بر روي كامپوزيت Al6061/Al2O3.WC.SiC ساخته شده با فرآيند اصطكاكي اغتشاشي"
    Hossein Lashgari, Mohammad hossein Pourgalalo, Amir Momeni, Soroosh Parvizi
    دومين كنفرانس ملي مكانيك محاسباتي و تجربي, 2020
14. "بررسي تاثير فرايند عمليات حرارتي چند مرحله اي بر ريزساختار و استحاله فازي كامپوزيت تيتانيوم"
    Javad Taheri, Seyed Hadi Hosseini, Golam Reza Ebrahimi, Amir Momeni
    هشتمين كنفرانس بين المللي مهندي مواد و متالورژي, 2019
15. "تعيين دماي توقف تبلور مجدد Tnr و بررسي پديده رسوب گذاري در خلال تغيير شكل داغ فولاد hsla 100"
    احسان عزيزي راغب, Amir Momeni, Mahdi Soltanalinezhad
    هشتمين كنفرانس بين اامللي مهندسي مواد و متالورژي, 2019
16. "characteristics of hot compression behavior in CoCrCuFeNi high entropy alloy"
    Sepideh Bokaei, Hamid Reza Jafarian, Amir Momeni, Park Nokeun
    The 2nd international conference on high entropy alloys, 2018
17. "بررسي رفتار تغيير شكل داغ فولاد كم آلياژ استحكام بالا نسل سوم با قابليت كوئنچ و بخش بندي (QP)"
    محمدامين كريمي اصل, Amir Momeni, Mehdi Soltanalinejad
    پنجمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2018
18. "An Investigation of Mechanical Properties of Graphene Oxide/ FBE Coatings"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni
    هفتمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2018
19. "مدل سازي منحنيهاي سيلان تغيير شكل گرم فولاد PH 71 4 با معادله - جانسون كوك"
    زهرا سنگري مطلق, Behzad Tolaminejad, Amir Momeni
    هفتمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2018
20. "An investigation into the thermal stability and corrosion behavior of epoxy / graphene oxide nanocomposite in pipeline coatings"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni
    Proceedings of the 7th International Conference on Nanostructures (ICNS7), 2018
21. "Study the effect of friction stir processing on microstructure and mechanical properties of Ti-6Al-4v"
    الهه فريد, Amir Momeni, Ehsan Khademi
    The Biennial International Conference on Experimental Solid Mechanics, 2018
22. "An Investigation of Mechanical and Thermal Properties of Graphene/ FBE Coatings"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni
    The Biennial International Conference on Experimental Solid Mechanics (X0Mech 2018), 2018
23. "بررسي امكان استفاده از پوشش هاي نانوكربني جهت بهبود مقاومت به خوردگي و افزايش پايداري حرارتي در خطوط لوله"
    فهيمه ماه حيدري, Behzad Tolaminejad, Amir Momeni, Mohammad Ali Khoshkar
    ششمين كنفرانس بين المللي نفت، گاز، پالايش و پتروشيمي با رويكرد توسعه ارتباط بين دولت دانشگاه و صنعت, 2017
24. "مدلسازي منحني هاي سيلان تغيير شكل گرم فولاد 17-7PH توسط معادله جانسون-كوك"
    Saeed Mortezaee, Hossein Arabi, Seyed Hossein Seyyedein, Amir Momeni
    ششمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2017
25. "بررسي مكانيزم شكست اتصال فولاد x65 به روش جوشكاري قوس الكتريك دستي"
    هانيه نوريون, Ghaderi Hamidi -Ahmad, Amir Momeni, Babak Mogoui
    اولين كنگره ملي كاربرد مواد و ساخت پيشرفته در صنايع, 2017
26. "مقايسه رفتار سيلاني فولادهاي 100 K و 410 AISI در خلال تغيير شكل در دماهاي بالا"
    سميرا قدر, سميرا زنگنه نجفي, Amir Momeni
    كنفرانس بين المللي مهندسي مواد و متالورژي, 2016
27. "بررسي ريزساختار و رفتار سيلاني فولاد پركروم- پركربن 107 K در خلال تغييرشكل در دماي بالا"
    راضيه آوند, سميرا زنگنه نجفي, Amir Momeni
    كنفرانس بين المللي مهندسي مواد و متالورژي, 2016
28. "بررسي تحولات ريزساختاري و خواص مكانيكي فولاد زنگ نزن دوفازي 2304 طي عمليات ترمومكانيكي"
    مهسا محمدپور, Amir Momeni, Hossein Alinejad
    پنجمين كنفرانس بين المللي مهندسي مواد و متالورژي, 2016
29. "Microstructural investigations and fracture analysis of a crashed aircraft sample"
    Hamidreza Faridi, Amir Momeni, مهسا محمدپور
    كنفرانس بين المللي مهندسي مواد, 2016
30. "تررسي تحولات ريزساختاري و خواص مكانيكي فولاد زنگ نزن دوفازي 2304 طي عمليات ترمومكانيكي"
    مهسا محمدپور, Amir Momeni, Hossein Alinejad
    پنجمين كنفرانس بين المللي مهندسين متالورژي, 2016
31. "بررسي تاثير Ni و شرايط عمليات حرارتي آستنيته كردن بر ريز ساختار و خواص مكانيكي فولاد زنگ نزن 410"
    پريسا آئيني, Amir Momeni
    پنجمين كنفرانس بين المللي مهندسي متالورژي و مواد, 2016
32. "تاثير ميزان گوگرد بر روي رسوب فاز هاي سولفيدي درحين شكل دهي فولاد هاي قالب پلاستيك"
    Hossein Alinejad, Amir Momeni, Ahmad Nazari
    كنفرانس ملي مكانيك، مواد و فناوري هاي پيشرفته, 2016
33. "بررسي ريزساختار سوپرآلياژ پايه نيكل ريختگي111 GTD طي عمليات مكانيكي-حرارتي"
    مهسا محمدپور, Amir Momeni, Hamidreza Faridi
    كنگره سالانه متالورژي, 2015
34. "بررسي ريسساختار سوپرآلياش پايه نيكل ريختگي GTD 111 طي عمليات مكانيكي-حرارتي"
    مهسا محمدپور, Amir Momeni, Hamidreza Faridi
    همايش بين المللي مهندسي مواد, 2015
35. ""
    Amir Momeni, Hamidreza Faridi, سميرا قدر, Raziye Avand
    2nd conference on materials engineering, 2015
36. "بررسي رفتار مكانيكي فولاد هدفيلد در دماي بالا"
    صياد نوبهار, Amir Momeni
    كنفرانس ملي مهندسي مواد, 2015
37. "St تاثير عمليات حرارتي آنيل بر قابليت پخت سختي فولاد كم كربن 14"
    Amir Momeni, Hamidreza Faridi, Raziye Avand, سميرا قدر
    دومين همايش ملي مهندسي مواد, 2015